HSH-30 and HSH-60 series hose stands are designed to provide low cost, high speed truck fueling. The HSH-30 series hose stands have a nominal flow rate of 35 GPM through a single 1” hose and high capacity truck nozzle. The HSH-60 series hose stands have a nominal flow rate of 60 GPM through a single 1½” hose and high capacity truck nozzle. Actual flow rate will depend upon pump size, meter size and installation conditions.

HSH-30 and HSH-60 series hose stands have an 8½" square column, fabricated from 12 gauge steel with a 14" square, 7 gauge steel base. All stands include a DPDT pump/valve switch and hose hanger. A 1” pre-piped internal solenoid valve is optional on the HSH-30 series hose stand. A 1½” valve is optional on the HSH-60 series hose stand. A counterweight high hose retractor is available as an accessory.

HSH-30 and HSH-60 series hose stands are used to fuel far side tanks on trucks. These stands can be used in conjunction with meter stands, high speed dispensers, or conventional computing or non-computing dispensers. The optional solenoid valve can be factory mounted into the hose stand for isolation from the master dispensing device.