Convenience, flexibility, durability, and ease of installation are all major considerations at fueling sites. PMC’s Pole Mount nozzle boot / switch assembly provides the installer and end user with a convenient and heavy duty fueling position. The compact size of the Pole Mount enables it to be installed anywhere there is access to a fuel supply. The Pole Mount is an excellent choice for the fueling island or construction site.

PM series nozzle boot / switch assemblies are designed to provide a low cost and convenient forced switch nozzle hang up. The compact 6-3/4” x 6-3/4” x 21” housing can be field mounted to almost any pole or other convenient location that provides fuel line access. The explosion proof DPDT internal switch may be used to control an isolation solenoid, pump motor starter, or other process control device. Placing the nozzle in the nozzle boot forces the switch off.

The two basic configurations of the PM units are as follows:
· PM-1B – Pole mount with left hand access door and bottom conduit entry.
· PM-2B – Pole mount with right hand access door and bottom conduit entry.
· Optional Stainless Steel housing available upon request – consult factory .